Holden Astra Convertible Roof: Astra Bad Forum Advice

Holden Astra Convertible Roof: Astra Bad Forum Advice: Another Astra owner following back yard advice from an automotive forum has lead to another hydraulic pump failure this week costing over $...

Astra Bad Forum Advice

Another Astra owner following back yard advice from an automotive forum has lead to another hydraulic pump failure this week costing over $7500 +Gst.

Bolting latches together on the early models can cause the hydraulic pump to fail Holden / General motors has changed the design in the late model this solving this issue. Although putting the wrong oil in the pump system will also causing a similar pump failure.

If you cannot ask for your money back when things go wrong it is a little bit silly to take there advice.

ALNO Product Services manufactures of Holden Astra Roof Latches hydraulic hoses and hydraulic oil.

  

Holden Astra Convertible Roof: Hydraulic Hose, Latches and Oil Service

Holden Astra Convertible Roof: Hydraulic Hose, Latches and Oil Service: Holden Dealers across Australia are fitting ALNO Product Services reconditioned Roof Latches A professional team of machinists at ALNO...

Hydraulic Hose, Latches and Oil Service

Holden Dealers across Australia are fitting ALNO Product Services reconditioned Roof Latches

A professional team of machinists at ALNO Product Services recondition Holden Astra Convertible Roof Latches on the basis of a replacement services furthermore ALNO Product Services and offer a 5 year warranty on the Hydraulic Hose, Latches and Oil service.

Additional information on broken latches fixed part No. 0919 8575 &; 0919 8574 contact ALNO Product Services on the central coast.

www.alnoproductservices.com.au

 If you have recently fitted new Astra latches to you car ALNO Product Services are interested in purchasing old broken roof latches for recondition.

Hydraulic Hose | Latches | Oil service | Astra | Roof | Convertible

The CNC Milling Machine

A milling machines is a machine tool (powered mechanical device, typically used to fabricate metal components) used to machine solid material. Milling machines are often classified into two basic forms: Horizontal and Vertical, which refers to the orientation of the main spindle. Both the types range in size from small, bench-mounted devices to room-sized machines. Milling machines can move the work piece radially against the rotating milling cutter, which cuts on its sides as well as its tip. Milling machines may be manually operated, mechanically automated, or digitally automated via computer numerical control (CNC).

A  vertical milling machine is a machine in which the spindle axis is vertically oriented. Milling cutters are held in the spindle and rotate on its axis. The spindle can generally be extended allowing plunge cuts and drilling. A horizontal milling machine is a machine where the cutters are mounted on a horizontal arbor across the table. A majority of horizontal milling machine also features a +15/-15 degree rotary table that allows milling at shallow angles.

A CNC milling machine is an automated milling tool that can cut 3D shapes out of a block of material. Most CNC milling machines are computer controlled vertical mills with the ability to move the spindle vertically along the Z-axis. The extra degree of freedom permits their use in die sinking, engraving application, and 2.5 D surface such as relief sculptures. When combined with the use of conical tools or a ball nose cutter, it also significantly improves milling precision without impacting speed, providing a cost-efficient alternative to most flat-surface hand-engraving work.

CNC machines can exist in virtually any of the forms of manual machinery, like horizontal milling machines. The most advanced CNC milling machines, the multi-axis machine, add two more axes in addition to the three normal axes (XYZ). Horizontal milling machines also have a C or Q axis, allowing the horizontally mounted work piece to be rotated, essentially allowing asymmetric and eccentric turning. The fifth axis (B axis) controls the tilt of the tool itself. When all of these axes are used in conjunction with each other, extremely complicated geometries, even organic geometries such as a human head can be made with relative ease with these machines. But the skill to program such geometries is beyond that of most operators. Therefore, 5 axis milling machines are practically always programmed with CAM.

For all you CNC mill machining requirements Contact ALNO Product Services  

www.alnoproductservices.com.au

cnc | milling | machining| Sydney | Newcastle | Central Coast

Mechanical Designers - CNC Machinists - 3D Machining: The CNC Milling Machine

Mechanical Designers - CNC Machinists - 3D Machining: The CNC Milling Machine: A milling machines is a machine tool (powered mechanical device, typically used to fabricate metal components) used to machine solid mate...

Astra Roof Stuck

Alno Product Services have recondition over 75 Astra Roof Latches in the past year.

Many of the latches have a 2 year warranty

Reconditioning Astra Roof Latches Holden Astra Convertible Bertone Models 2001 - 2006

www.alnoproductservices.com.au

Astra | Convertible | Latches | Broken | Roof | Problem | Stuck | Won't Close